Water-based PU glue 3kg

Appearance: colorless transparent mucus
Viscosity: 1600 ± 200mpa.s(23 ± 2℃)
Features and uses: invariable yellow type, strong initial viscosity, good heat resistance, good drawing resistance, moderate viscosity maintenance time, suitable for manual and assembly line operation.

  • Product Detail

Water-borne glue (also known as white latex)

Water-based glue does not contain organic solvents with no pollution to the environment. It emisses zero VOC,and has no stimulating odor.The viscosity is also good. But the price is more expensive compared to the pu glue. It is suitable for the upper and midsole bonding, it can also be used to bond leathers.

Scope of product application:

This PU glue has been widely used in industries that making shoes and leather products, such as canvas shoes / leather shoes / casual shoes / plate shoes for a variety of shoes, can be applied to materials such as: EVA, PVC, PU, TPR, rubber, leather, ABS, nylon, fabric, etc

Characteristics of the product:

Washable and no degumming, waterproof, strong viscosity, transparent without trace, soft and not hard, brush effort, strong adhesion, fast dry time, non-toxic flame retardant

Use precautions:

Clean and polish the contact surface that needs to be adhered, choose the corresponding treatment agent according to different materials to apply evenly, apply glue on both sides and wait for completely dry, and then use oven or hot fan and other tools  blow fast with high temperature, to compact with pressing machine or cloth strip and wrapped, then static for 24 hours.


Store in original unopened containers between 8℃-30℃ Reseal immediately once used. Preserve and transport as flammable product.

quality assurance :

uTransparent waterproof, green environmental protection, fully automatic assembly line, engineer quality test, stability test, viscosity test,  check at each level.

PREVIOUS:Water-based PU glue 680ml

NEXT:Water-based PU glue 15kg

Leave a Reply



Leave a message